Networking & Telecom Products

Intelligent Gateway | Router | Access Point

Networking & Telecom

Argus Systems (AESPL) has built competencies in Networking and Telecom industry acquiring in-depth knowledge and expertise and has created intellectual property, re-usable platforms, and solutions. We have integrated hardware, software, and system design to provide our customers with valuable solutions in Networking and Telecom. Argus Systems believes in "First time Right solution" and with an experienced Product Engineering team, we can be your complete electronic product design and development partner.

Telecom Tower Remote Monitoring System

Argus Systems as an OEM has designed and developed solutions for the Telecom tower remote monitoring system. Our solutions integrate various sensors, the gateway to be used for remote monitoring and control with inbuilt data analytics for telecom and cell phone towers.
Our telecom/cell tower monitoring solution can empower you to monitor assets, manage security, detect fuel leakages, track fuel efficiency and observe any environmental conditions in real-time as well as alarm based threshold detection will generate for any errors.
Our solutions can be integrated with AI and ML to enable predictive maintenance instead of scheduled maintenance and lead in overall cost reduction of the assets.

    Generated & Monitored Alarms

  • Door Alarm
  • Fire and Smoke Alarm
  • Temperature
  • Fuel level threshold alarm
  • DG set on/off/battery low
  • Mains power on/off
  • Low battery
Telecom Tower Remote Monitoring System

Wireless Access Point

  • A Portable access point can act as a Router or bridge as per the configuration done on the device.
  • supports storage devices to be connected to the Access point which gives it an additional benefit for the users to access all the files locally or remotely over LAN or WAN interfaces.
  • Wireless: 802.11 b/g/n, 2.4 GHz, 1x1 SISO, 150MBps max data
  • Built-in chip antenna as well external antenna option
  • 2X Ethernet
  • 400MHz CPU for low power
  • Onboard FLASH, RAMs
  • USB and MicroSD Storage.
  • Inbuilt rechargeable battery for portable access point requirements
  • Access Point supports router and bridge modes
  • Globally Accessible, Locally controlled data Storage
Wireless Access Point

Dual Port E1 PRI Card

PCI & PCIe Based card designed for off the shelf hardware.

  • ITU-T I.431 ISDN support in TE and NT mode.
  • EURO ISDN compliant.
  • HDLC controller with support for 31 E1-channels.
  • Transparent mode and data rate independently selectable for all FIFOs.
  • Up to 32 FIFOs for transmitting and receive data each, FIFO sizes configurable.
  • Multiparty audio conferences were switchable.
  • DTMF Detection on all 32 channels.
  • Self echo cancellation.
  • MISDN support also makes it an ideal choice for OpenPBX IP-PBX.
Dual Port E1 PRI Card

Managed Ethernet Switch

This Web Smart Ethernet Switches unify plug-and-play simplicity with incomparable performance and reliability to create a cost-effective solution for workgroups, departments, and Home.

Its IEEE 803.3af capable 4 POE ports are capable of providing power and data from a single point, which makes users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless Access Points (APS), IP phones, and IP cameras. Enhanced features of the product include 2 Gigabit SFP combo ports, QoS, and versatile management functions.

  • 4 10/100 BASE-T Auto-negotiating, Auto MDI/MDI-X ports with 802.3 Flow Control.
  • 4 10/100 BASE-T POE enabled Auto-negotiating, Auto MDI/MDI-X ports, 802.3 Flow Control with 802.3af Power over Ethernet.
  • 2 (SFP) can be used as Gigabit Fiber optic/ Copper Port
  • Per device: Power/PWR Error Port LED, Mode Indicator: Link/Act Mode
  • Per 10/100 BASE-T port: Link/Act
  • Per SFP slot: Link/Act/error, 1000Mbps
Managed Ethernet Switch

Data Converters ( RS232, RS422, RS485)

Converters are small modules that convert single-ended RS-232 signals into differential RS-422 or RS-485 signals. Signal conversion is completely bidirectional - outgoing RS-232 signals are converted to RS-422/RS-485 differential levels and incoming RS-422/RS-485 differential signals are converted into single-ended RS-232 signals.

The Converter has a DB-9 female connector on one end that mates to the DB-9 male connector found on the rear of most PCs and other serial devices. Besides its use with PCs, the Converters can be used with any 9-pin RS-232 device whose pinout matches that of a PC's COM port. Once equipped with the Converter, the PC or RS-232 device can communicate with other RS-422 or RS-485 devices.


  • Convert single-ended RS-232 signals to RS-485 or RS-422 differential signals. Bidirectional data transfer with increased noise rejection.
  • Extends RS-232 transmission distance to 1.2 Km. Overcomes RS-232's 50-foot cable limit.
  • Adds multi-drop capability to an RS-232 signal. Drives up to 50 loads.
  • Meets FCC Class A and European CE requirements. Should not interfere with other devices.
Data Converters

Serial to Ethernet Converter

Any device with a standard serial interface can connect to Ethernet with embedded devices servers in a snap. Embedded device servers provide a 10/100 Mbps Ethernet interface with ready-to-use operation modes such as TCP Server, TCP Client, and UDP.

  • 10/100 Mbps Ethernet interface
  • 230.4 Kbps serial interface
  • TCP Server, TCP client, UDP, and Real COM operation modes
  • Support for DHCP, BootP, Static IP, and ARP
  • SNMP and e-mail alert for event trapping and notification
  • Low power consumption at 1.5W, with single +5V input
  • Easy on-site configuration of network settings
  • Simple command frame format
  • Comprehensive command set for serial and network configuration
  • Easily switch between software and hardware triggers
  • Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP, SMTP Utilities: Network Enabler Administration Suite for Windows 98/NT/2000/XP/2003/Vista
  • OS Driver Support: Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver, Linux Real TTY, Unix
  • Configuration: Web console, serial console, Telnet console, or Windows utility
  • Operation Modes: TCP Server, TCP Client, UDP, Real COM
Serial to Ethernet Converter
Networking & communications Products & solutions

Reach out to Argus Application Engineering team to discuss your requirements for Networking and telecom products and solutions.

Argus Systems ( AESPL ) is a globally recognized Electronic System Design and Electronic manufacturing company with Its Operations in India, USA, UK, Australia offering Networking and Telecom products and solutions such as Gateway, Router, Wireless Access Point, Managed Ethernet Switch, ISDN cards, data converters ( RS232, RS422, RS485, Ethernet) and Telecom Tower Remote Monitoring System.