Electronic Control Panel - Oil & Gas

For operation and monitoring of electronic circuitry in harsh or explosion hazardous environments, versatile control units are developed with multitude of control functions such as push buttons, LED indicators, control switches.

• Ex II 2 G Ex db eb IIC T4 Gb
• Ex II 2 D Ex tb IIIC T130°C Db
• Material : Stainless steel 1.4404 (AISI 316 L)
• 5x indicator Lamp red
• 1x Indicator lamp green
• 1x Illuminated pushbutton red
• 1x Illuminated pushbutton Green
• 1x rotary switch
• Earth Element
• Camlock

Emergency shutdown Valve (ESDV) Control Unit : Oil & Gas

Electronics Controller for emergency shutdown ( ESD ) Valve detects abnormal Pressure conditions on a production process and initiate a shutdown of valve if any of the reading shows the operation is no longer within the pre-set safety margins of pressure.

• Pressure [High Pressure & Low-Pressure sensing from 60 to 20,000 psi].
• System Battery Level sensors.
• Emergency shutdown command from SCADA/RTU system.
• The Pressure gauges indicate the actual reading and set points.
• Indicator lamps indicate the status of pressor sensors and alarms which helps the operator in instantly knowing the conditions of the process.
• A green LED shows that the system is operating without problems.
• System Normally operates with open ESD valve and closure of ESD valve indicates that an alarm is present.

Data Acquisition Module - Electric Power

Feeder Data Acquisition modules is a 4/8 Channel standalone Unit that directly connects to contact multiplying relays (CMR) panel in feeder circuits of substation and sends status over RS485. The Installation of the DAQ module on CMR Panel has significant advantages over traditional architectures.

• Eliminates the use of long signal Cables between CMR and RTU and thereby Improves reliability.
• Addresses space constraint in substation / control panels.
• Eliminates the risk of damage by rodents as long cable is eliminated.
• Faster implementation and maintenance saves project and AMC time.
• Faster location and restoration fault due to modular design.
• Direct configuration through MODBUS, saves CMR termination hassle at RTU
• Offers Higher communication reliability by using redundant RS-485 data link to RTU.
• The rugged unit is suitable for an extreme environme

Power Plant SCADA - Solar Power

• Energy Management Gateways for Monitoring and Control applications including Power Plant SCADA, Energy management systems for Smart Buildings, Campuses, and Smart Cities.
• Energy Management Gateways for Monitoring and Control applications including Power Plant SCADA, Energy management systems for Smart Buildings, Campuses, and Smart Cities.
• These gateways are multiprotocol supporting monitoring of MFMs, MFRs, Weather Stations, a variety of sensors and other data loggers or controllers over serial, wireless, or Ethernet network interfaces.
• Digital and Analog I/O modules are provided to monitor various statuses and alarms from TG, Transformer & LT/HT panels, and protection relays. Relay based controls are provided for ON/OFF control of breakers, pumps, etc.
• Each gateway monitors a set of devices and sends data to a local or cloud-based server which provides long term storage and browser-based access through dashboards.